Boat Covers – Fitting Instructions
Before fitting your cover make sure all sharp points and protruding equipment/fitting are well covered with a cloth or sponge to avoid damaging your cover.
- Fit front end of the cover over bow (label indicates front)
- Carefully pull the cover over boat until fully covered
- Fit tie-down straps
- Pull webbing in hem using rear metal camlock buckles until tight
- Fit trailering straps
- Adjust hem and webbing, tie down and trailering straps until your cover is fully secured & tension ed evenly
T-Top Console Cover
- Fasten the two FRONT webbing straps to the underside of the T-Top frame at the front
- Wrap the cover around console and seating to be covered
- Fasten the two REAR webbing straps to the underside of the T-Top frame at the rear
- Zip the cover together
- Adjust the height of the cover by adjusting FRONT and REAR webbing straps for the optimum coverage
NOTE: The Cover zips together on the Starboard side